Carbide Drills and Composite Cutting Tools |
 |
 |
Carbide Brad Point Drills |
| The specially modified tip of the drill bit keeps the composite fibers in tension while cutting them in shear which results in no delaminating, eliminating "fuzz" or "fray" when the drill bit exits the material, creating a more precise hole. |
|
 |
|
|
 |
Carbide Drill / Reamers |
| Carbide combination drill reamers allow you to drill and ream in one operation eliminating multiple tools and steps. Also known as a "one-shot" drill-reamer, this tool can be used for hand drilling through a bushing or with power or positive feed drill motors. These drills are excellent for drilling graphite composites. |
|
|
|
|
 |
Carbide Dagger Drills |
| The dagger drill has proven to be the best drill for drilling on backed carbon fiber because of its ability to reduce delamination and at the same time produce a precise hole. |
|
|
|
|
 |
Solid Carbide Jobber Length Drills - Wire Sizes |
| Precision ground carbide drills are designed for high feed rates with good chip disposal. Recommended for use on Cast Iron, Aluminum, Plastic, Composites, Nonferrous Alloys and other easily machined materials. 118° four facet point angle drill point minimizes drill wander and assures accurately sized holes. |
|
|
|
|
|
Solid Carbide Jobber Length Drills - Fractional Sizes |
| Precision ground carbide drills are designed for high feed rates with good chip disposal. Recommended for use on Cast Iron, Aluminum, Plastic, Composites, Nonferrous Alloys and other easily machined materials. 118° four facet point angle drill point minimizes drill wander and assures accurately sized holes. |
|
|
|
|
|
Solid Carbide Jobber Length Drills - Letter Sizes |
| Precision ground carbide drills are designed for high feed rates with good chip disposal. Recommended for use on Cast Iron, Aluminum, Plastic, Composites, Nonferrous Alloys and other easily machined materials. 118° four facet point angle drill point minimizes drill wander and assures accurately sized holes. |
|
|
|
|
|
Solid Carbide Jobber Length Drills - Metric Sizes |
| Precision ground carbide drills are designed for high feed rates with good chip disposal. Recommended for use on Cast Iron, Aluminum, Plastic, Composites, Nonferrous Alloys and other easily machined materials. 118° four facet point angle drill point minimizes drill wander and assures accurately sized holes. |
|
|
|
|
 |
Carbide Threaded Shank Adapter Drill - Short |
| For strand free, accurate holes in laminate composite and graphite material. Threaded Shank Drill Bits. |
|
|
|
|
 |
Carbide Threaded Shank Adapter Drill - Long |
| For strand free, accurate holes in laminate composite and graphite material. Threaded Shank Drill Bits. |
|
|
|
|
 |
Piloted Solid Carbide Drills |
| Precision ground micrograin 118º drill point recommended for use on Cast Iron, Aluminum, Plastic, Composites, Nonferrous Alloys and other easily machined materials. |
|
|
|
|
 |
Solid Carbide Stop
Countersinks 100° |
| Three flute design gives excellent wear resistance to highly abrasive materials and difficult to machine materials. Precision ground for concentricity. Solid carbide stop countersinks are available in 3/8" and 1/2" diameter. |
|
|
|
|
 |
Carbide Tipped Stop Countersinks with Integral Pilot |
| Carbide tipped countersinks are designed for cutting highly abrasive materials such as composites and difficult to machine materials where longer tool life is desired. The tool body is made of high-speed steel. Carbide tipped stop countersinks with integral pilot are available in 3/8", 1/2", and 5/8" diameter. |
|
|
|
|
 |
Carbide Tipped Stop Countersinks with Replaceable Pilots |
| 100˚ countersink angle with replaceable pilot and 1/4-28 threaded shank. Carbide tipped countersinks are designed for cutting highly abrasive materials such as composites and difficult to machine materials where longer tool life is desired. Replaceable pilot construction allows for replacement of damaged pilots and substitution of various pilot diameters with the same countersink. |
|
|
|
|
 |
Pilots For Carbide Tipped Stop Countersinks |
| These pilots are designed for use with carbide tipped countersinks. Made from the finest quality tool steel, heat treated and precision ground to exacting size and concentricity. |
|
|
|
|
 |
High Performance Aircraft Cutting Tools In Stock and Ready to Ship, Shop Today! |
|
|
|
|
|
|
